Adding BIO ID to the Key Previous Top Next

In order to enable three-factor authentication, the KSD should store user's biometric identifiers.
Note: The choice of biometric device is determined by the physiological characteristics of user and the location of his computer.
In order to add BIO ID do the following:

  1. Click the "Change BIO ID" button in program window. The window with the list of installed drivers for biometric devices will appear.
    2. selecting_device
    Figure 44. Selecting biometric device
  2. Check the "Enable Biometric ID verification" checkbox and select the biometric device from the list.
  3. If the fingerprint scanner is used, e.g. BioLink U-Match, the user will be required to provide his fingerprints for scanning for several times. As soon as the scanning procedure is complete, the user's BIO ID is stored on the KSD.

fingerprint
Figure 45. Presenting biometric identifier - user's fingerprint

If the voice recognition device is used, e.g. SAFLINK Scansoft Voice Verification, the user will be required to speak the Key phrase into a microphone to create his voice template (Figure 46). After the voice template is created, it is then stored on the KSD.

user_control_phrase
Figure 46. Presenting biometric identifier - user's control phrase