PC Hardware Requirements

Top  Previous  Next

Dekart Private Disk MultiFactor does not have any specific  hardware requirements, most of the existing requirements target the operating system of your computer.

 

 

For Dekart Private Disk MultiFactor to run properly, a PC with the following minimum configuration is required:

 

•Intel Pentium 166 MHz processor

 

•16 MB RAM
 
•2 MB or more free hard disk space

 

In addition to this, the PC must be equipped with one of  the following ports to connect the electronic Keys:

 

•A USB port, if the electronic Key for the USB port is used.
 
•A COM port, if a smart card reader for the COM port is used.
 
•A PS/2 interface, if a smart card reader with the PS/2 interface is used.

 

One of the following hardware components is required if only the Private Disk MultiFactor software component has been purchased from Dekart (without electronic Keys and a corresponding reader):

 

•The eToken R2 or the eToken PRO Key with sufficient memory capacity.
 
•Smart card reader complying with the PC/SC specification connected to the computer.
•If you prefer to use three-factor authentication, a biometric device is needed, e.g. BioLink U-Match Mouse.