Adding biometric identifier to the KSD
Previous  Top  Next

To enable the three-factor authentication, you will need to store your biometric identifier on the KSD.
Note. The choice of biometric device is determined by user's physiological characteristics and the location of his computer.
To add BIO ID, please do the following.
1.Follow the instructions provided in the "Administering Dekart Logon - preliminary steps" section.  
2.Go to Settings (Key settings) tab and click Change BIO ID.  
 
37
Figure 24

3.Check the Enable Biometric ID verification checkbox and select the biometric device from the list.  
4.If the fingerprint scanner is used, e.g. BioLink U-Match, the user will be required to provide his fingerprints for scanning for several times. As soon as the scanning procedure is complete, the user's BIO ID will be stored on the KSD.  

56
Figure 25

If the voice recognition device is used, e.g. SAFLINK Scansoft Voice Verification, the user will be required to speak the key phrase into a microphone to create his voice template (Figure 26). After the voice template is created, it is then stored on the KSD.

39
Figure 26